概述：1 攪拌系統1 Mixing systemJS1000混凝土攪拌機的攪拌系統由電動機、皮帶輪、減速器、開式齒輪、攪拌筒攪拌裝置、供油裝置等部件組成。
1. Mixing system
The mixing system of JS1000 concrete mixer consists of motor, pulley, reducer, open gear, mixing drum, mixing device, oil supply device and other components.
The motor is connected with the cycloidal needle reducer, and the two output shafts of the reducer drive the two horizontally configured mixing shafts to rotate at a reverse constant speed through two pairs of open gears.
2. Feeding system
The feeding system is composed of winch mechanism, feeding dragon frame, hopper, feeding nozzle and other components.
The brake motor ensures that the hopper can stop at any position when running at full load, and the braking torque is adjusted by the large nut on the back seat of the motor.
3. Water supply system
The water supply system of JS1000 concrete mixer is composed of water pump, throttle valve, cleaning device and spraying device.
The flow of water can be adjusted by driving the throttle valve through the cylinder, and the total amount of surface water supply is adjusted by the electronic scale.
4. Unloading system
The unloading system of JS1000 concrete mixer is composed of unloading VI, air pump, reversing valve, air distribution valve, air cylinder, electrical and other mechanisms.
The discharge door is installed at the bottom of the mixer to realize pneumatic discharge through the cylinder. And the opening and closing position of the discharge door. The sealing of the discharge door can be ensured by adjusting the position of the sealing strip. Jss1000 unloading manual operating lever is used for emergency unloading in case of temporary power failure and unloading in case of cylinder failure. It should be removed at ordinary times to prevent personal injury.
5. Electrical system
The electrical control circuit is equipped with air switch, fuse and thermal relay, which has the functions of short-circuit protection and overload protection. All control buttons, air switch handles and indicator lights are arranged on the door of the distribution box and equipped with door locks. A protective cover is arranged outside the button.
The electrical control power supply is 380V three-phase four wire power supply, and the allowable voltage error is ± 10%, otherwise it is prohibited to use. If the user provides its own power supply, the capacity shall be ≥ 100kVA. The surface temperature rise of the motor is ≤ 60 ℃, and the live part to the shell edge is ≥ 0.5m Ω.
The above wonderful content comes from the small mixer. For more wonderful content, please click to enter our website: http://www.vancebikelawyer.com , we will have more wonderful content for you to see