概述：1檢查攪拌筒托輪以及馬達，看是否是有土石雜物卡住，如果有，將雜物清理干凈即可。1 Check the supporting wheel and motor of th
1. Check the supporting wheel and motor of the mixing drum to see if there are earth and stone debris stuck. If so, clean the debris.
2 if it is not due to sundries stuck and unable to rotate, call the rescue vehicle immediately.
3. If it is possible to discharge the concrete, remove the pipe joint of the high-pressure hose on the motor, rotate the mixing drum, make the mixing drum manhole downward, and discharge the concrete from the manhole.
4 after the rescue vehicle arrives at the site, remove the high-pressure hose on the motor of the failed vehicle, connect the high-pressure hose for rescue, connect the other end to the oil pump of the rescue vehicle, connect the emergency oil return pipe to the oil drain port of the motor of the failed vehicle, and connect the other end to the oil return port of the oil pump of the rescue vehicle, and use the rescue vehicle to control the rotation of the mixer of the failed vehicle until the concrete is discharged.
5 if conditions permit, the faulty motor can be directly replaced. After replacing the motor, connect each oil pipe, and the mixing drum can rotate normally.
When the mixing drum stops running, how to avoid concrete solidification or tank stuffing is the first problem to be considered. Therefore, when dealing with the fault, we must be decisive and fast to avoid aggravating the loss caused by delay.
The content of this article is provided to you by the self feeding mixer. We focus on customer needs, continue to develop and provide customers with more services. For details, please refer to our website: http://www.vancebikelawyer.com