Double flashing lights, also known as hazard warning lights, are mainly used in case of vehicle failure, emergency tasks or extreme weather. The main purpose of using double flashing lights is to tell other vehicles that our vehicle is in a state of emergency and should pay attention to avoidance.
Fog lamp: the main feature of the fog lamp is that it has very strong penetration and will not produce diffuse reflection reaction due to fog. Therefore, the fog lamp can not only remind other vehicles to pay attention to our vehicles, but also expand our driving vision in foggy days. Self mixing concrete mixer
The use of lights in bad weather is also stipulated in the road safety law:
1. If the visibility is less than 200m, it is necessary to turn on the fog lights, low beam lights, position lights and front and rear position lights, and the speed shall not exceed 60km / h. at the same time, the distance from the front vehicle shall be kept at more than 100m. Self mixing concrete mixer
2. If the visibility is less than 100m, turn on the fog lights, low beam lights, clearance lights, front and rear position lights, as well as the double flashing lights. The driving speed of the vehicle shall not exceed 40km / h, and the distance from the vehicle in front shall be maintained at a distance of more than 50m.
3. When the visibility is less than 50m, turn on the fog lights, clearance lights, low beam lights, front and rear position lights and double flashing lights. At this time, the vehicle speed needs to be controlled within 20km / h, and drive out of the expressway from the nearest exit as soon as possible. For the self mixing concrete mixer truck, the illegal use of lights will also be fined. In some places, the inspection is not strict and will not be fined. However, remind you not to take chances. After all, driving safety is the most important. For the use of these lights, I hope it can help you!